SST2630A
Wireless Strap-On Temp. Sensor, 2 In.
by
done_outline8888 in stock
addShow Locations
removeHide Locations
Battery Operated, Plastic Enclosure, 20 ft. Plenum Cable.
Features
Museums, Churches, Historical Buildings And New Construction Applications
Battery Operated Wireless Temperature Sensor That Can Be Used As A Remote Probe For Monitoring Refrigeration Or Strap-On For Pipes Using The Reliable 900MHz Spread Spectrum Technology For Communication
The Sensing Element Is In A 2 in., 0.25 in. O.D. Stainless Steel Probe With A 20 ft. Cable Length That Will Be Able To Cover Most Duct Applications
Sends The Temperature Wirelessly To The RM2432D Receiver, Which Converts The Wireless Signal To Voltage For Use With A DDC Controller, Or To A Transceiver That Will Send The Data To A BAS Using BACnet, Modbus, Or Lon works Protocol
Transmission Distance In A Typical Building Is 200-300 ft. Horizontal Depending On The Layout And Construction Of The Building, And One Floor Above And One Floor Below The Transceiver
Sensor Distance And Reliability Can Be Increased With The Addition Of A RR2552B(s) Repeater
Technical Details
Configuration
Duct, Remote, Strap On
Enclosure
Plastic
Probe Lead
2-4
Mounting
Duct Mount
Sensors Application
Temperature, Wireless